How do I setup Microsoft Authenticator for the first time

Multifactor authentication, or MFA, protects your account by requiring an additional verification step when you sign in.

Follow these instructions if:

  • You are setting up MFA for the first time.
  • IT reset your MFA settings and instructed you to enroll again.
  • You see More information required after signing in.

This process registers Microsoft Authenticator as a verification method for your MState Microsoft 365 account. Microsoft describes this as registering an additional sign-in verification method.

Before you begin

You will need:

  • A computer with an internet connection
  • Your smartphone or tablet
  • Your StarID and StarID password
  • The Microsoft Authenticator app installed on your mobile device

Install Microsoft Authenticator

Install the official Microsoft Authenticator app published by Microsoft Corporation from your device’s app store:

Important: Complete the setup using both a computer and your mobile device. The computer will display a QR code that you must scan using Microsoft Authenticator on your mobile device.

Step 1: Sign in using your MState account

On your computer, sign in to Microsoft 365 or another service that uses your MState account.

Enter your username using the appropriate format:

  • Employees: StarID@minnstate.edu
  • Students: StarID@go.minnstate.edu

Enter your StarID password and select Sign in.

Step 2: Begin setting up MFA

After you sign in, you will see a "More information required" message. This means you need to provide additional information to help secure your account.

Uploaded image

Select Next.

Step 3: Start the Microsoft Authenticator setup

The Keep your account secure page will open.

If Microsoft Authenticator is already installed on your mobile device, select Next.

If it is not installed:

  1. Install Microsoft Authenticator from your mobile device’s app store.
  2. Return to the setup page on your computer.
  3. Select Next.

Uploaded image

Keep this page open on your computer. You will use your mobile device for part of the remaining setup.

Step 4: Prepare Microsoft Authenticator

Open Microsoft Authenticator on your mobile device.

If this is the first time you have opened the app, follow the onscreen prompts. Allow notifications when asked so the app can send you sign-in approval requests.

In Microsoft Authenticator:

  1. Select + or Add account.
  2. Select Work or school account.
  3. Select Scan a QR code.
  4. Allow camera access if prompted.

The app needs camera access to scan the QR code displayed on your computer. If you don't allow camera access, Microsoft also provides a manual setup option.

Uploaded image

Step 5: Display the QR code

Return to the Set up your account page on your computer.

Select Next.

A QR code will appear on the computer screen.

Uploaded image

Important: Scan the QR code from within Microsoft Authenticator. Do not use your mobile device’s regular camera app.

Step 6: Scan the QR code

On your mobile device, use the QR code scanner in Microsoft Authenticator to scan the code displayed on your computer.

After you add the account to Microsoft Authenticator, return to your computer and select Next.

If you can't scan the QR code, select Can’t scan the QR image? on the computer and follow the instructions to enter the information manually.

Step 7: Approve the test notification

Microsoft will send a test notification to Microsoft Authenticator.

On your mobile device:

  1. Open the notification or Microsoft Authenticator.
  2. Enter the number shown on your computer, if prompted.
  3. Select Approve.

Return to your computer after approving the request.

Uploaded image

Uploaded image

Step 8: Finish the setup

After the test is approved, the computer will confirm that the notification was approved successfully.

Select Next, and then select Done to complete the setup.

Microsoft Authenticator is now registered as an authentication method for your Minnesota State Microsoft 365 account. Microsoft’s setup process tests the registration by sending a notification to the app before completing enrollment.

What happens after setup?

When Microsoft requires additional verification during a future sign-in, it may send a notification to Microsoft Authenticator.

To complete the sign-in:

  1. Review the sign-in request.
  2. Enter the number displayed on the sign-in screen, if prompted.
  3. Select Approve.

Only approve a request when you are actively signing in.

Security warning: If you receive an unexpected Microsoft Authenticator request, select Deny. Do not approve a request that you did not initiate.

Troubleshooting and account changes

What if I replaced or lost my phone?

If possible, set up your new phone while you still have access to your old phone. This is the easiest option because you can use your existing authentication method to sign in and add the new device to your account.

Adding Microsoft Authenticator to a new device does not automatically remove it from your old device. After you successfully enroll your new phone and confirm it works, remove Microsoft Authenticator from the old device and unregister the old device from your work or school account. 

If you no longer have access to your old phone, cannot approve authentication requests, or can't sign in, contact IT for help. To protect your account, IT must verify your identity before resetting your multifactor authentication methods. Verification may be completed:

  • In person with a photo ID, or
  • Through a Zoom meeting with your camera enabled and photo ID.

Once IT verifies your identity, they can reset your MFA registration so you can enroll Microsoft Authenticator or another approved authentication method on your new device.

What if I do not see the setup prompt?

If you do not see the More information required or Keep your account secure screens and are taken directly to a Verify your identity page, Microsoft is attempting to use authentication methods already registered to your account.

If you still have access to one of the verification methods shown, complete the sign-in process and then review or update your authentication methods.

If you don't have access to any of the options displayed, or if your Microsoft Authenticator app no longer works because you replaced your phone, reset your device, uninstalled the app, or otherwise lost access to your registered authentication method, contact IT for assistance.

To protect your account, IT must verify your identity before resetting your MFA registration. Verification may be completed:

  • In person with a photo ID, or
  • Through a Zoom meeting with your camera enabled and a photo ID.

After we reset your MFA settings, sign in again and follow the setup instructions in this article.

Related Articles

What is Multi-Factor Authentication(MFA)

MFA Changes coming soon

Get Help

  • Call the Computer Help Center at 218-299-6600
  • Visit the Computer Help Center on your campus
  • Submit a ticket to the M State Computer Help Center